Bike Gear Maintenance

Make sure you check your brakes and derailleur cables on the mountain bike on a regular basis is very important. worn or dirty cables can seriously affect the braking and also change. If they are dirty you can clean them, but if they are worn or starting to fray, they must be replaced!

Inspection of cables mountain bike

The first thing to do is take a look at the case. Search for all types of wrinkles or damage. Take a look at the cable, you can see and search for signs of fraying or damage. If you can see that the cable or housing is damaged, he really needs to be replaced.

Cables Cleaning

If grinding is felt or heard when the brakes are applied, or if you have difficulty moving, it's probably time to clean the wires on your bike. Start by removing the casing and the cable of the motorcycle. Undo the hose clamp with an allen wrench and remove the cap end of the cable with pliers. Be careful! If the end of the cable is frayed or distorted, it will be difficult to put the cable back in. You may need a new one in this case.

Keep track of all the bits so that you remember how to put it back together. With an old rag to wipe the cable a merit. If there is a lot of dust and dirt, you can use a little de-greaser. Once done, check the cable stops because they can really take in the dirt. Squirt some lubricant into the light housing to clean the dirt.

Lubrication

After thoroughly cleaning the cable, you must re-lubricated. Make sure you avoid using lubricants of the heavy chain that they can block things quickly. Use a dry cloth, wax-based lubricant and an old cloth to rub the cable until it is smooth.

After all back together make sure to apply the brakes and move up and down through the gears to make sure everything works.

For more information on Mountain Bikes and all the mountain bike accessories you need, visit http://www.singletrackbikes.co.uk .